Switch capture
From SDA Knowledge Base
Contents
Console Information
| Resolution | Docked: 480p/720p/1080p Handheld/Tabletop: 720p |
| Virtual Console Resolution | To be confirmed |
| A/V Outputs | Only HDMI |
| Backwards Compatibility | None |
Nintendo Switch
The Switch features is the first Nintendo console to not support standard definition cables including RF, Composite, S-Video, RGB, DVI, VGA and Component. It only supports HDMI
Recording at higher resolutions
Recording at higher resolutions requires that you have a capture device that is capable of recording in high definition signal. Your capture device must have HDMI inputs. Because the Switch only supports HDMI.
Some high definition capture cards have a passthrough feature where they are able to both capture the signal and broadcast it to your television without introducing any lag. If your capture device doesn't support this feature then you will have to get a powered splitter.
If you are recording capture footage using an HDMI connector, you do not have to worry about HDCP (High Definition Content Protection). The Switch's video signal does not contain HDCP and so this is not a concern when recording.
Switch Virtual Console Releases
To be added later when VC is officially released.
Todo: Add image of the Switch console as the upload image feature isn't working properly (06/03/2017)
