Difference between revisions of "Switch capture"

From SDA Knowledge Base

Jump to: navigation, search
(Created page with "Editing Wii U capture WikitextPreviewChangesPublishCancel BoldItalicSignature and timestampLinkEmbedded fileReferenceAdvancedSpecial charactersHelp == Console Information ==...")
 
m
Line 1: Line 1:
Editing Wii U capture
 
WikitextPreviewChangesPublishCancel
 
BoldItalicSignature and timestampLinkEmbedded fileReferenceAdvancedSpecial charactersHelp
 
 
 
== Console Information ==
 
== Console Information ==
 
[[Image:Switch.png ]] <br />
 
[[Image:Switch.png ]] <br />

Revision as of 09:57, 6 March 2017

Console Information

File:Switch.png

Nintendo Switch
Resolution Docked: 480p/720p/1080p
Handheld/Tabletop: 720p
Virtual Console Resolution To be confirmed
A/V Outputs Only HDMI
Backwards Compatibility None


Nintendo Wii U

The Switch features is the first Nintendo console to not support standard definition cables including RF, Composite, S-Video, RGB, DVI, VGA and Component. It only supports HDMI

Recording at higher resolutions

Recording at higher resolutions requires that you have a capture device that is capable of recording in high definition signal. Your capture device must have HDMI inputs. Because the Switch only supports HDMI.

Some high definition capture cards have a passthrough feature where they are able to both capture the signal and broadcast it to your television without introducing any lag. If your capture device doesn't support this feature then you will have to get a powered splitter.

If you are recording capture footage using an HDMI connector, you do not have to worry about HDCP (High Definition Content Protection). The Switch's video signal does not contain HDCP and so this is not a concern when recording.


Switch Virtual Console Releases

To be added later when VC is officially released.

Todo: Add image of the Switch console as the upload image feature isn't working properly (06/03/2017)

Personal tools