Ori/Techniques and Glitches

This page covers basic movement techniques and glitches used in Ori speedruns. You can use this as a reference to understand how specific applications of these techniques work, and also to think about new and useful ways to apply them.

Running and Jumping

Basics

Basic movement is straightforward: as long as you hold the analog stick all the way in a direction, or hold the movement key, Ori will run at maximum speed. Jumping preserves Ori's full horizontal speed, and also saves a very small amount of time (frames?) per jump by reducing the effect of friction on Ori. The difference between running all the time and jumping all the time is very minimal, so it's okay not to get too crazy about this.

Flip Jumps

If you jump repeatedly, every third jump Ori will perform a front flip. There is no known difference in height achievable through this flip jump.

Wall Slides and Vaulting

When jumping into a wall, Ori will slide up the wall a small amount, dependent on the angle and friction of the wall. If Ori slides up far enough to clear the top of the wall, she will "vault" up and over it. This saves a few frames in horizontal movement compared to jumping over the top of the wall.

Firsties

A "firsty" is when you perform a jump on the first frame that you are able to do so after landing from a previous jump. When you perform a "firsty," the game allows you to jump normally but will not restore your double or triple jump.

The most common case where you will experience this is in wall jumping. The unexpected loss of your double or triple jump will most likely cause you to fail a platforming section and fall down, costing you time. To avoid this, try to wait a very small amount of time after touching a wall before wall jumping.

Terra Jumps

A "Terra jump" is an intentional use of a "firsty." When you are in the middle of a "Bash glide" (covered below), performing a "firsty" from the ground will preserve your horizontal speed. This is called a Terra jump. You may also use a charge jump for this technique to increase your height and extend the horizontal distance you can travel. Note that you can perform a Terra jump regardless of whether you have already consumed your double or triple jumps!

Bash Techniques

Bash Gliding

Upon releasing a Bash, Ori is given a very large amount of speed in the aimed direction. Normally, your vertical speed returns to normal very quickly due to gravity. However, if you release all directional input (that is, don't press the analog stick or left/right keys), your horizontal speed will not decrease. When this is done with a horizontal or nearly-horizontal Bash, Ori can travel very quickly across very large distances.

While you are Bash gliding, you can use and release Kuro's Feather at will, use your double and triple jumps, and also perform a Terra jump off the ground. As long as you don't provide any directional input and don't run into any obstacles, Ori will retain her horizontal speed. Note that gravity applies as normal, so Ori will eventually hit the ground!

Double Bash

If you release a Bash one frame, then re-press the Bash button/key the next frame, Ori will be able to Bash twice off of the same target. When you perform this technique, the first Bash will determine the direction the target goes (opposite of the direction you aim it), and the second Bash will determine the direction Ori goes. Using this technique, you can move the target in a desired direction while following it closely.

Important note: Bash has a 20 frame "windup" delay during which it cannot be released. If you release and re-press the Bash button/key during the windup delay, the Bash will simply not release. Make sure you wait for 20 frames (1/3 of a second) before trying to double Bash.

Perfect Bash

As it turns out, you don't need to perform a double Bash in order to accomplish having Ori and the projectile both go in the same direction. The game determines which direction to send the projectile one frame before it determines which direction to send Ori. During this extra frame, you can re-aim Bash to achieve the same effect as a double Bash. This saves less than a second per successful attempt compared to a double Bash, so it's not really recommended for anyone.

Save Manipulation

Save Anywhere

By opening the ability screen with the UI on, clicking on the experience counter to create a popup, then hitting A+B, left+right click, or esc+enter on the same frame, you gain the ability to move with the ability screen open. Then, you can save the game anytime by leveling up an ability.

Cutscene Skips

By saving the game after a cutscene begins, either by using save anywhere or rekindling/leveling an ability on a pre-placed save, then exiting and reloading the file, you can gain control of Ori during the cutscene. Most cutscenes trigger their effects as soon as they begin, with the exception of opening the Mount Horu door and a few of the Gumo chase sequence cutscenes.

Save Drops

By saving the game while in the air and reloading the file, Ori will (in most cases) drop to the closest solid ground directly below the save. This can be accomplished with save anywhere or saving while running off the edge of a platform. Tricks that use this include drainless and the lava drop in Horu.

Miscellaneous Mechanics

Spirit Flame

Optimal damage is inflicted by spirit flame when shots are paced 18 frames (300ms) apart. Firing 2 shots within 17 frames of each other will incur a 30 frame (500ms) cooldown before Sein can fire again. With quick flame, the cooldown is triggered if 2 shots are fired within 17 frames of each other, then a third shot is fired within 17 frames of the second.

Extended Charge Jumps

By performing a save anywhere during a upwards-angled charge jump off of a wall, upon reloading the file, Ori will have extreme speed in the direction of the charge jump. Unlike a bash glide, this speed will decay over time to zero. Currently, this has no known use in a speedrun, as the setup time is too great.