Difference between revisions of "TurboGrafx-16 Capture"
From SDA Knowledge Base
(→Alternatives to the turbo booster) |
|||
| Line 21: | Line 21: | ||
===Alternatives to the turbo booster=== | ===Alternatives to the turbo booster=== | ||
*Make your own cable - If you feel comfortable buying a few parts you can [http://www.cgquarterly.com/articles/tg16_cable.htm make your own A/V connectors.] This is a bit more involved, but can save you some money | *Make your own cable - If you feel comfortable buying a few parts you can [http://www.cgquarterly.com/articles/tg16_cable.htm make your own A/V connectors.] This is a bit more involved, but can save you some money | ||
| + | *Use a VCR to get A/V out - By plugging the RF connector from the TurboGrafx-16 into a VCR, you can use the VCR's A/V out to get the composite and RCA connectors needed for capture. Be warned as you do take a hit in audio/video quality when doing this. | ||
Revision as of 13:39, 27 May 2014
Console Information
| Resolution | 240* |
| A/V Outputs | RF, Composite (with Turbo Booster attachment) |
*The TurboGrafx-16 used a variety of resolutions, but they can roughly be lumped under the category of 240. None of the resolutions approach 480 lines of resolution.
Getting the best video quality
The TurboGrafx-16 console shipped with RF out. RF provides the worst A/V quality of any connector. The TG-16 also had an expansion slot. With the slot you could connect an accessory called the Turbo Booster. The turbo booster gives the console A/V out by adding composite video and RCA audio cables. This is the ideal way of getting the best possible audio and video quality out of your console.
The turbo-booster accessory that allows for A/V out
Alternatives to the turbo booster
- Make your own cable - If you feel comfortable buying a few parts you can make your own A/V connectors. This is a bit more involved, but can save you some money
- Use a VCR to get A/V out - By plugging the RF connector from the TurboGrafx-16 into a VCR, you can use the VCR's A/V out to get the composite and RCA connectors needed for capture. Be warned as you do take a hit in audio/video quality when doing this.
