Difference between revisions of "Anri-chan/Source/sasami.pl"

From SDA Knowledge Base

Jump to: navigation, search
(thought of this in the shower just now ...)
(trimming should be totally done - moving to audio now)
 
Line 8: Line 8:
  
 
#system("export DYLD_LIBRARY_PATH=/Volumes/l/anrix");
 
#system("export DYLD_LIBRARY_PATH=/Volumes/l/anrix");
 +
my $really_quiet = "";
 +
$really_quiet = "-really-quiet";
  
 
#to move to anri config file later
 
#to move to anri config file later
Line 32: Line 34:
 
for (@avs) {
 
for (@avs) {
 
chomp;
 
chomp;
 +
next if m/^#/;
 
push(@sources,"${1}.VOB") if m/^.*MPEG2source\("(.+)\.d2v".*$/;
 
push(@sources,"${1}.VOB") if m/^.*MPEG2source\("(.+)\.d2v".*$/;
 
push(@sources,$1) if m/^.*avisource\("([^"]+)".*$/;
 
push(@sources,$1) if m/^.*avisource\("([^"]+)".*$/;
Line 53: Line 56:
 
}
 
}
 
die 'sasami: no sources detected in .avs!' if @sources == 0;
 
die 'sasami: no sources detected in .avs!' if @sources == 0;
 +
 +
$newframerate = ($pal ? (50/$f) : (59.94/$f)); #required for trimming
 
 
 
@mencoderargslist = ();
 
@mencoderargslist = ();
$previous_sourcelength = 0;
+
my $sourcelength = 0;
 +
my $previous_sourcelength = 0;
 +
my @trimargsarr = ();
 
foreach $source (@sources) {
 
foreach $source (@sources) {
 
#get vital info about source
 
#get vital info about source
my $sourcelength = 0;
 
 
$mplayeridentify = <<SABRAC;
 
$mplayeridentify = <<SABRAC;
 
mplayer -identify -vo null -slave ${source} 2>&1 <<ENDOFSCRIPT
 
mplayer -identify -vo null -slave ${source} 2>&1 <<ENDOFSCRIPT
Line 79: Line 85:
 
 
 
#build mencoder command to feed fifo
 
#build mencoder command to feed fifo
$mencoderargs = "./mencoder";
+
$mencoderargs = "./mencoder ${really_quiet}";
 
 
 
#trimming
 
#trimming
Line 85: Line 91:
 
# $framerate = 25 if $pal;
 
# $framerate = 25 if $pal;
 
 
### FIXME do trim(0,0)
+
### BUG: a trim in a later source followed by a trim in an earlier source does not work as expected
### FIXME do multiple trims per source - add to list?
+
 
my $source_intermediate = 1;
 
my $source_intermediate = 1;
 +
$source_intermediate = 0 if !@trims;
 +
my $ss = 0;
 +
my $sourcecount = 1; #need to immediately cat a source declaration if a trimpoint is identified
 +
my $trimargs = '';
 
for (@trims) {
 
for (@trims) {
 
m/^(.*),(.*)$/;
 
m/^(.*),(.*)$/;
 
 
 
if ($1 || $2) {
 
if ($1 || $2) {
$source_intermediate = 0; #for killing trailing unused sources; there are still trim points so don't need to worry about that this time
+
$source_intermediate = 0; #1 for killing trailing unused sources - there are still trim points so don't need to worry about that this time around
 
}
 
}
 
 
 
if ($1) {
 
if ($1) {
$source_intermediate = 1; #this source might have been trimmed out - see if ($2) block below for more
+
if ($1 ne 0) { #no need to do anything if it's the initial frame - unlike in avisynth, mencoder's first trim argument is optional
if ($1 < $sourcelength) {
+
$source_intermediate = 1; #this source might have been trimmed out - see if ($2) block below for more
$mencoderargs .= " -ss ".abs(($previous_sourcelength - ($1 / $framerate)));
+
if ($1 < $sourcelength) {
$_ = ",$2"; #wipe this trim point out so we don't accidentally use it twice
+
if ($sourcecount) {
 +
push(@trimargsarr, $trimargs) if $trimargs;
 +
$trimargs = '';
 +
$sourcecount = 0;
 +
}
 +
print "($1 / $framerate) - $previous_sourcelength\n";
 +
$trimargs .= " -ss ".
 +
(
 +
$1 - $previous_sourcelength
 +
) / $framerate;
 +
$ss = ($1 - $previous_sourcelength); #remember how far in we started since -endpos is relative to this
 +
$_ = ",$2"; #wipe this trim point out so we don't accidentally use it twice
 +
$source_intermediate = 0; #this source was not trimmed out
 +
}
 +
} else {
 +
$_ = ",$2"; #wipe this trim point out
 
$source_intermediate = 0; #this source was not trimmed out
 
$source_intermediate = 0; #this source was not trimmed out
 
}
 
}
Line 105: Line 129:
 
 
 
if ($2) {
 
if ($2) {
if (!($1)) {
+
if ($2 ne 0) { #no need to do anything if it's final frame - unlike avisynth, mencoder's second trim argument is optional
$source_intermediate = 1; #this source was trimmed out
+
if (!($1)) {
}
+
$source_intermediate = 1; #this source was trimmed out
if ($2 < $sourcelength) {
+
}
$mencoderargs .= " -endpos ".abs(($previous_sourcelength - ($2 / $framerate)));
+
if ($2 < $sourcelength) {
$_ = ","; #wipe this trim point out so we don't accidentally use it twice
+
#have to insert a conversion factor ($newframerate / $framerate) to handle the fact that the output framerate can differ from the input framerate - -endpos is not based on output framerate while -ss is
 +
print "((($2 - $previous_sourcelength) - $ss) / $framerate) * ($newframerate / $framerate)\n";
 +
$trimargs .= " -endpos ".
 +
(
 +
(
 +
($2 - $previous_sourcelength) - $ss
 +
) / $framerate
 +
)
 +
*
 +
($newframerate / $framerate);
 +
$_ = ","; #wipe this trim point out so we don't accidentally use it twice
 +
$source_intermediate = 0; #this source was not trimmed out
 +
$sourcecount = 1; #this source declaration can't take any more -ss and/or -endpos
 +
}
 +
} else {
 +
$_ = ","; #wipe this trim point out
 
$source_intermediate = 0; #this source was not trimmed out
 
$source_intermediate = 0; #this source was not trimmed out
 
}
 
}
Line 117: Line 156:
 
}
 
}
 
$previous_sourcelength = $sourcelength;
 
$previous_sourcelength = $sourcelength;
next if $source_intermediate;
+
next if $source_intermediate; #this source was trimmed out entirely
 +
push(@trimargsarr, $trimargs) if $trimargs; #in case we had no complete trims
 
 
 
#one pixel bob
 
#one pixel bob
Line 154: Line 194:
 
}
 
}
 
 
$newframerate = ($pal ? (50/$f) : (59.94/$f));
 
 
$x264newframerate = "--fps ${newframerate}";
 
$x264newframerate = "--fps ${newframerate}";
 
$mp4boxnewframerate = "-fps ${newframerate}";
 
$mp4boxnewframerate = "-fps ${newframerate}";
Line 165: Line 204:
 
$mencoderargs .= " -vf-add format=i420 -ovc raw -of rawvideo -nosound";
 
$mencoderargs .= " -vf-add format=i420 -ovc raw -of rawvideo -nosound";
 
 
$mencoderargs .= " ${source}";
+
my $mencoderargstemp = '';
$mencoderargs .= " -o ${avs}";
+
while (my $trimargs = shift(@trimargsarr)) {
 +
$mencoderargstemp .= $mencoderargs." ${source}".$trimargs." -o ${avs}\n";
 +
}
 +
$mencoderargs = $mencoderargstemp;
 
 
 
push(@mencoderargslist,$mencoderargs);
 
push(@mencoderargslist,$mencoderargs);
Line 189: Line 231:
 
}
 
}
 
close(MF);
 
close(MF);
$statidmencoderargs = "./mencoder -vf-add scale=${newwidth}:${newheight} -vf-add format=i420 -ovc raw -of rawvideo -nosound -ofps ${newframerate} mf://\@statid.txt -mf fps=${newframerate}:type=tga -o ${avs}";
+
$statidmencoderargs = "./mencoder ${really_quiet} -vf-add scale=${newwidth}:${newheight} -vf-add format=i420 -ovc raw -of rawvideo -nosound -ofps ${newframerate} mf://\@statid.txt -mf fps=${newframerate}:type=tga -o ${avs}";
 
}
 
}
 
}
 
}

Latest revision as of 15:08, 18 October 2008

#!/usr/bin/perl
#nathan jahnke <njahnke@gmail.com>

use warnings;
use strict 'subs';
package sasami;

#system("export DYLD_LIBRARY_PATH=/Volumes/l/anrix");
my $really_quiet = "";
$really_quiet = "-really-quiet";

#to move to anri config file later
$gba_crop_left = 43;
$gba_crop_top = 39;
$gba_crop_right = 44;
$gba_crop_bottom = 41;

$gb_crop_left = 80;
$gb_crop_top = 48;
$gb_crop_right = 80;
$gb_crop_bottom = 48;

sub pipe_prepare($) {
	$basename = shift;
	$avs = "${basename}.pipe";
	system("rm ${avs}") if -e $avs;
	system("mkfifo ${avs}");
	open(AVS, "${basename}.avs"); #must be unix text when running sasami under unix ...
	@avs = <AVS>;
	close(AVS);
	@sources = ();
	@trims = ();
	for (@avs) {
		chomp;
		next if m/^#/;
		push(@sources,"${1}.VOB") if m/^.*MPEG2source\("(.+)\.d2v".*$/;
		push(@sources,$1) if m/^.*avisource\("([^"]+)".*$/;
		push(@sources,$1) if m/^.*directshowsource\("([^"]+)".*$/;
		$fieldorder = 1 if m/^AssumeTFF\(\)/;
		$fieldorder = 0 if m/^AssumeBFF\(\)/;
		$d = 1 if m/^global d1 = true/;
		$d = 4 if m/^global d1 = false/;
		$f = $1 if m/^changefps\(f1\/([0-9])\)/;
		$deflicker = 1 if m/^nate_retard_bob_2/;
		$vhs = 1 if m/^nate_vhs_head_change_erase/;
		$onepixel = 1 if m/^nate_1_pixel_bob_fix/;
		$nes = 1 if m/^nate_nes$/;
		push(@trims,"$1,$2") if m/trim\(([0-9]+),([0-9]+)\)/;
		$gba = 1 if m/^nate_gba$/;
		$gb = 1 if m/^nate_gb$/;
		$resize = 1 if m/^lanczos4resize\(d1,last\.height\)/;
		$statidlines[0] = $1 if m/^statid1="""(.*)"""$/;
		$statidlines[1] = $1 if m/^statid2="""(.*)"""$/;
		$statidlines[2] = $1 if m/^statid3="""(.*)"""$/;
	}
	die 'sasami: no sources detected in .avs!' if @sources == 0;
	
	$newframerate = ($pal ? (50/$f) : (59.94/$f)); #required for trimming
	
	@mencoderargslist = ();
	my $sourcelength = 0;
	my $previous_sourcelength = 0;
	my @trimargsarr = ();
	foreach $source (@sources) {
		#get vital info about source
		$mplayeridentify = <<SABRAC;
mplayer -identify -vo null -slave ${source} 2>&1 <<ENDOFSCRIPT
quit
ENDOFSCRIPT
SABRAC
		for (qx($mplayeridentify)) {
			chomp;
			$width = $_ if s/ID_VIDEO_WIDTH=([0-9]+)/$1/;
			$height = $_ if s/ID_VIDEO_HEIGHT=([0-9]+)/$1/;
			$framerate = $_ if s/ID_VIDEO_FPS=([0-9.]+)/$1/;
			$maxaudiobitrate = $_ if s/ID_AUDIO_BITRATE=([0-9]+)/$1/;
			$sourcelength += ($framerate * $_) if s/ID_LENGTH=([0-9.]+)/$1/;
		}
	# 	print "$width\n";
	# 	print "$height\n";
	# 	print "$framerate\n";
	# 	print "$maxaudiobitrate\n";
		$pal = ($height eq "576");
		
		#build mencoder command to feed fifo
		$mencoderargs = "./mencoder ${really_quiet}";
		
		#trimming
	# 	$framerate = 29.97;
	# 	$framerate = 25 if $pal;
	
		### BUG: a trim in a later source followed by a trim in an earlier source does not work as expected
		my $source_intermediate = 1;
		$source_intermediate = 0 if !@trims;
		my $ss = 0;
		my $sourcecount = 1; #need to immediately cat a source declaration if a trimpoint is identified
		my $trimargs = '';
		for (@trims) {
			m/^(.*),(.*)$/;
			
			if ($1 || $2) {
				$source_intermediate = 0; #1 for killing trailing unused sources - there are still trim points so don't need to worry about that this time around
			}
			
			if ($1) {
				if ($1 ne 0) { #no need to do anything if it's the initial frame - unlike in avisynth, mencoder's first trim argument is optional
					$source_intermediate = 1; #this source might have been trimmed out - see if ($2) block below for more
					if ($1 < $sourcelength) {
						if ($sourcecount) {
							push(@trimargsarr, $trimargs) if $trimargs;
							$trimargs = '';
							$sourcecount = 0;
						}
						print "($1 / $framerate) - $previous_sourcelength\n";
						$trimargs .= " -ss ".
							(
								$1 - $previous_sourcelength
							) / $framerate;
						$ss = ($1 - $previous_sourcelength); #remember how far in we started since -endpos is relative to this
						$_ = ",$2"; #wipe this trim point out so we don't accidentally use it twice
						$source_intermediate = 0; #this source was not trimmed out
					}
				} else {
					$_ = ",$2"; #wipe this trim point out
					$source_intermediate = 0; #this source was not trimmed out
				}
			}
			
			if ($2) {
				if ($2 ne 0) { #no need to do anything if it's final frame - unlike avisynth, mencoder's second trim argument is optional
					if (!($1)) {
						$source_intermediate = 1; #this source was trimmed out
					}
					if ($2 < $sourcelength) {
						#have to insert a conversion factor ($newframerate / $framerate) to handle the fact that the output framerate can differ from the input framerate - -endpos is not based on output framerate while -ss is
						print "((($2 - $previous_sourcelength) - $ss) / $framerate) * ($newframerate / $framerate)\n";
						$trimargs .= " -endpos ".
							(
								(
									($2 - $previous_sourcelength) - $ss
								) / $framerate
							)
								*
							($newframerate / $framerate);
						$_ = ","; #wipe this trim point out so we don't accidentally use it twice
						$source_intermediate = 0; #this source was not trimmed out
						$sourcecount = 1; #this source declaration can't take any more -ss and/or -endpos
					}
				} else {
					$_ = ","; #wipe this trim point out
					$source_intermediate = 0; #this source was not trimmed out
				}
			}
			
		}
		$previous_sourcelength = $sourcelength;
		next if $source_intermediate; #this source was trimmed out entirely
		push(@trimargsarr, $trimargs) if $trimargs; #in case we had no complete trims
		
		#one pixel bob
		if ($onepixel) {
			$mencoderargs .= " -vf-add crop=${width}:".($height-1).":0:0,expand=${width}:${height}:0:1";
			$fieldorder = 0 if $fieldorder == 1;
			$fieldorder = 1 if $fieldorder == 0;
		}
		
		#nes
		$mencoderargs .= " -vf-add crop=".($width-8).":${height}:8:0,expand=${width}:${height}:8:0" if $nes;
		#-af channels=6:4:0:0:0:1:0:2:0:3 media.avi
		#Would change the number of channels to 6 and set up 4 routes that copy channel 0 to channels 0 to 3.  Channel 4 and 5 will contain silence.
		
		$mencoderargs .= " -vf-add yadif=3 -vf-add mcdeint=1:${fieldorder}" if $d == 1;
		$tfields = 0;
		$tfields = 4 if $deflicker;
		$mencoderargs .= " -vf-add tfields=${tfields}" if $d == 4;
		
		#i just eyeballed this - someone will need to sync the avisynth and mencoder sharpen filters
		$mencoderargs .= " -vf-add unsharp=l3x3:0.6:c3x3:0.6" if $deflicker;
	
		$mencoderargs .= " -vf-add crop=${width}:".($height-12).":0:0,expand=0:-12:0:0" if $vhs;
		
		if ($gba) {
			$mencoderargs .= " -vf-add scale=320:240";
			$mencoderargs .= " -vf-add crop=".(320-$gba_crop_right-$gba_crop_left).":".(240-$gba_crop_bottom-$gba_crop_top).":${gba_crop_left}:${gba_crop_top}";
			$mencoderargs .= " -vf-add scale=240:160";
			$newwidth = 240;
			$newheight = 160;
		} elsif ($gb) {
			$mencoderargs .= " -vf-add scale=320:240";
			$mencoderargs .= " -vf-add crop=".(320-$gb_crop_right-$gb_crop_left).":".(240-$gb_crop_bottom-$gb_crop_top).":${gb_crop_left}:${gb_crop_top}";
			$newwidth = (320-$gb_crop_right-$gb_crop_left);
			$newheight = (240-$gb_crop_bottom-$gb_crop_top);
		}
	
		$x264newframerate = "--fps ${newframerate}";
		$mp4boxnewframerate = "-fps ${newframerate}";
		$mencoderargs .= " -vf-add framestep=${f}";
		
		$newwidth  = (($d == 1) ? ($pal ? 704 : 640) : ($pal ? 352 : 320)) unless $newwidth;
		$newheight = (($d == 1) ? ($pal ? 576 : 480) : ($pal ? 288 : 240)) unless $newheight;
		$mencoderargs .= " -vf-add scale=${newwidth}:${newheight}" if $resize;
		
		$mencoderargs .= " -vf-add format=i420 -ovc raw -of rawvideo -nosound";
		
		my $mencoderargstemp = '';
		while (my $trimargs = shift(@trimargsarr)) {
			$mencoderargstemp .= $mencoderargs." ${source}".$trimargs." -o ${avs}\n";
		}
		$mencoderargs = $mencoderargstemp;
		
		push(@mencoderargslist,$mencoderargs);
	}
	
	if (defined $statidlines[0]) {
		use Imager;
		$img = Imager->new;
		$img->read(file=>"ntsc_d1.tga") or die "Cannot load statid image: ", $img->errstr;
		$font = Imager::Font->new(file=>"/Library/Fonts/Verdana.ttf"); #will need to be changed for non-mac unix ...
		&statid_lines_write($statidlines[0], $img->getheight/2, 36, 'white'  ) if defined $statidlines[0];
		&statid_lines_write($statidlines[1], 360,               36, 'white'  ) if defined $statidlines[1];
		&statid_lines_write($statidlines[2], 400,               36, 'white'  ) if defined $statidlines[2];
		&statid_lines_write("Audio commentary on track 2", 460, 28, '#E1CE8B') if defined $audio_commentary;
		$img->write(file=>'statid.tga')
		or die 'Cannot save statid.tga: ', $img->errstr;
		open(MF,">statid.txt") or die "Could not open statid.txt for appending!";
		for (1..5) { #once for each second of the statid
			for (1..$newframerate) { #once for each frame this second
				print MF "statid.tga\n";
			}
		}
		close(MF);
		$statidmencoderargs = "./mencoder ${really_quiet} -vf-add scale=${newwidth}:${newheight} -vf-add format=i420 -ovc raw -of rawvideo -nosound -ofps ${newframerate} mf://\@statid.txt -mf fps=${newframerate}:type=tga -o ${avs}";
	}
}

sub pipe_write {
	open(FIFO,">${avs}");
	print("$statidmencoderargs\n") if defined $statidlines[0];
	system($statidmencoderargs) if defined $statidlines[0];
	for (@mencoderargslist) {
		print("$_\n");
		system($_);
	}
	print("$statidmencoderargs\n") if defined $statidlines[0];
	system($statidmencoderargs) if defined $statidlines[0];
	close(FIFO);
}


$basename='pokemon'; #remove in anri
for(my $N = 1; $N <= 2 ; $N++) {
	&pipe_prepare($basename);# if $os eq 'unix'; #replace with $_[4] or whatever
	if ($N == 2) {
		# this is a hack to deal with the fact that sometimes x264 takes a while to finish encoding and write out the statsfile - thanks grenola!
		while (!(-e "${basename}.stats")) {
			print("Waiting for stats file ...\n");
			sleep(1);
		}
	}
	$x264command = "./x264 --pass ${N} --stats ${basename}.stats --bitrate 5000 --qpmin 0 ${x264newframerate} -o ${basename}.264 ${avs} ${newwidth}x${newheight} &";
	print("$x264command\n");
	system($x264command);
	&pipe_write;
}
$mp4boxcommand = "./mp4box ${mp4boxnewframerate} -new -add ${basename}.264 ${basename}.mp4";
print ("$mp4boxcommand\n");
system($mp4boxcommand);

exit 0;


#statid line text, y-offset, text size, color
sub statid_lines_write {
$font->align(string => $_[0],
	aa => 1,
	size => $_[2],
	color => $_[3],
	x => $img->getwidth/2,
	y => $_[1],
	halign => 'center',
	valign => 'center',
	image => $img);
}
Personal tools